ASPIRA - Aspirvelo Air Rhinocomfort 160 RF heat recovery unit and air sanitizer

ASPIRVELO AIR RHINOCOMFORT 160 RF - Fantini Cosmi

compact single-room heat recovery unit

and air sanitizer

NEW model complete with radio control

DESCRIPTION:

• The RHINOCOMFORT system consists of one or more decentralized ventilation units with highly efficient heat recovery to be installed on the perimeter walls; a ceramic heat exchanger inside the units accumulates the heat released by the flow of air extracted from the room and releases it, heating the air during the supply cycle.
• In addition to heat recovery, the system sanitizes outside air through photocatalysis. Thanks to the combined action of an LED light illuminating the duct through which the air passes and the water vapor it contains, RHINOCOMFORT decomposes harmful substances present in the incoming air, transforming them into harmless substances.
• Furthermore, the air introduced into the environment passes through two G3 filters which retain impurities.
• Each ventilation unit is equipped with a low-consumption brushless DC motor controlled by a microprocessor which, by processing information from the sensors on the unit (temperature, humidity and brightness) and the commands given with the remote control, adopts the most suitable ventilation modes to ensure the best environmental comfort.
• The minimum installable configuration is the "MASTER" unit and its remote control, to which several additional units can be added (up to a maximum of 64). The remote control, equipped with clear and intuitive graphics, allows the user to set and modify the various operating modes and check the current settings.

CHARACTERISTICS:

• RHINOCOMFORT cod. AP19990 includes: “MASTER” ventilation unit, heat recovery unit, photocatalytic system, external grille and remote control.
• The minimum configuration that can be installed is the “MASTER” unit and its remote control to which several additional units code AP19991 can be added (up to a maximum of 64).

VENTILATION UNIT

• Axial extractor/fan and brushless DC motor;
• Shockproof PVC telescopic tube;
• Regenerative ceramic exchanger;
• Photocatalytic system;
• Cross-linked polyurethane filters, filtration class G3 according to EN799;
• Flow straightener to ensure higher performance;
• Humidity and brightness sensor;
• Temperature sensor (Master unit only);
• Typical RF range: 100m outdoors, 30m indoors;
• IPX4 protection rating.

RADIO FREQUENCY REMOTE CONTROL

• Touch keyboard with 10 keys;
• Functional feedback via 9 blue LEDs;
• Typical RF range: 100m outdoors, 30m indoors;
• Degree of protection: IP40;
• Battery life: approximately 18 months (2 x CR2032 included).

ELECTRICAL CHARACTERISTICS OF THE FAN UNIT:

• Power supply 230V~ 50Hz;
• Transceiver frequency: 868 MHz.

ELECTRICAL CHARACTERISTICS OF THE RADIO FREQUENCY REMOTE CONTROL:

• Power supply: 2 3V button batteries, type CR2032 (included);
• Transceiver frequency: 868 MHz.

THE PACKAGE INCLUDES:

• 'MASTER' ventilation unit with heat recovery, photocatalytic system and external grille;
• Radio frequency remote control

ACCESSORIES AND SPARE PARTS:

• Additional ventilation unit with heat recovery, photocatalytic system and external grille;
• External air intake/exhaust terminal;
• G3 class filters;

Product code: AP19990