Fantini Cosmi ASPIRANTE helical aspirator with humidistat and timer - for hole Ø 80 100 120 (mm)

ASPIRANTE AP3104 HT - ASPIRA with automatic humidity control

SERIES

The Aspirante series extractors, with their modern and distinctive design, are easily installed in any type of residential or commercial environment requiring good flow rate and pressure. They are suitable for intermittent or continuous ventilation of small and medium-sized spaces such as bathrooms, kitchens, laundries, and offices.

Suitable for installation both for direct expulsion to the outside and for expulsion into ducts.

By using Aspirkit Vetro (purchased separately), it is possible to install the entire Aspirante line on glass.

The small size of the rear connection makes the entire Aspirante series suitable for installation in wall ducts with an initial curve very close to the entrance.

CHARACTERISTICS

Made of anti-UV and anti-static ABS

Induction motor Insulation Class F protected by thermal fuse

Maximum ambient temperature 45°C

Timer version adjustable from 45 seconds to 20 minutes

Version with adjustable humidistat from 40 to 80%

WITH AUTOMATIC HUMIDITY CONTROL - HT
The extractor fan starts operating when the relative humidity level RH in the room exceeds the pre-set activation point.
and continues to operate until the RH value has dropped below the preset threshold. When this threshold is reached
The TIMER function allows the extractor to continue operating for a programmable period of time from 45 seconds to 20 minutes.
approximately so as to further reduce the relative humidity value present in the room. The relative humidity value RH can be
regulated from a minimum value of 40% RH to a maximum value of 80% RH. This extractor can also be used manually
in the TIMER function.

Product Code: AP3104